10/2021 V 1.1
VIEW 22
Wet Side
Glass Supports
13/17
A�ach the Glass to Glass seal to the
Inline Panel.
Ensure a good seal along the edge of
the door.
Check the orienta�on is correct.
Remove the seals a�er checking.
A�ach the Return Panel to Door Bubble
“h” Seal to the Return Panel.
Check the orienta�on is correct.
Leave the Seal oversized. This will be
trimmed later.
Place the Glass Supports over the
Underframe as shown. With one
person inside the enclosure, posi�on
the Door onto the supports.
Add Spacers to the Glass Supports in
order to level the Door.
With someone inside, carefully replace
the Door onto the Supports.
Check all Panels are level and square
and that the Seals touch fully.
Inside Enclosure
Inward Opening
Outward Opening
Inside Enclosure
37
38
39
40
