10/2021 V 1.1
VIEW 22
08/17
Remove Inline Panel Packers and feed
the Underframe Wedge Gasket into the
archway gap of the Return Panel and
Inline Panel and trace along the Glass
on both sides.
Spray water on Glass Panel and use
Nylon Block to help feed Gasket.
Leave gaskets oversized un�l the
Underframe Top has been installed.
Trim both of the Wall Profile seals at
the top face of each Wall Profile using a
blade.
Check which Stay Bar configura�on
your screen has been supplied with and
refer to the relevant instruc�ons below.
(You can find this out at the front of
these instruc�ons).
Config A - SB12
Page 09
29
30
31
32
