10/2021 V 1.1
VIEW 06
6mm min
Wall Profile
Glass Panel
05/17
Ensure there is adequate glass in the
Wall Profile. (6mm is minimum)
To centre the panels, add 1mm Packers
on both sides of the Inline Panel in the
Underframe.
Apply the Rigid Seal to the dry side of
the Wall Profile star�ng from the
archway of the Wall Profile up to the
top.
Flush
Rigid Seal
Glass Panel
If the Glass is s�ll in place, remove it.
Add silicone in the corner where the
Wall profile Meets the Underframe at
the back.
Re-install the Glass.
Silicone the
inside corner
17
18
19
20
