10/2021 V 1.1
VIEW 06
06/17
Gently tap the Wall Profile Rigid Seal
into place using a rubber mallet with
the Nylon Block to protect the Glass
and the Wall Profile.
Trim the Wall Profile Seal at the top
face of the Wall Profile using a blade.
Check which Stay Bar configura�on
your screen has been supplied with and
refer to the relevant instruc�ons below.
(You can find this out at the front of
these instruc�ons).
Config A - SB1
Page 07
Config B - SB2
Page 10
25
26
27
