Fan Installation
(continued)
6
WARNING
See Pages 2-3
POWER OFF
Circuit Breaker
Identify control components from control package/s (see Step 1).
In addition to a receiving unit, your fan may have been ordered with a wall control
(transmitter), a handheld remote control (transmitter) or both.
Insert receiving unit into the top of the fan body and
make wire connections according to wire colors,
labels and diagram above. All ground wires must be
connected as shown in diagram. If ordered, install
wall control into wall box. If ordered with a remote
control only, the power to the ceiling box should be
connected through a simple On/Off switch leg.
3
Wiring Diagram
red
motor 1
blue
for optional light
white
for optional light
antenna
purple
motor 2
white
black
gray
motor 3
green
ground wires
receiving
unit
A/C power in
(neutral)
A/C power in
(load)
wall
switch
green
(ground)
fan or
fan and
light
Note:
The wall control is designed for control of a single fan only. Do not connect
multiple fans to a single wall control. To control multiple fans together, the remote
handset (in combination with a standard on/off switch) may be used. Contact
Modern Fan customer service for additional guidance.
