•
Insert the bread pan into the bread maker.
•
Place the ingredients into the bread pan and close the lid.
•
Press the Menu Select button and select the Baking function.
•
Press the Start/Stop button to activate the baking function.
•
When the time display shows “0:00”, the machine will beep a warning,
and then revert to the initial standby state.
•
If the baked product is finished before the baking process finishes (1
hour), press the Start/Stop button to stop the baking function. The
machine will revert to the initial standby state.
Cleaning your Bread Maker
•
Always unplug the bread maker from the mains power supply before
cleaning.
•
Allow the unit to cool before cleaning.
•
Do not clean any part of your bread maker in a dishwasher.
•
Do not submerge any part of the main body or mains cable in water or
any other liquids.
•
Wipe clean the outside of the main body with a soft damp cloth.
•
Remove the bread pan from the bread maker by pulling it upwards by
the handle. Wash the bread pan in warm soapy water and dry
thoroughly afterwards.
•
Never clean any part of the bread maker with harsh or abrasive
cleaners.
Electrical Connections
This appliance is fitted with a fused three-pin plug to BS 1363. If the
plug has to be removed, it should be cut off and carefully disposed of
immediately. To avoid a possible shock hazard, do not insert the
discarded plug into a mains socket.
Fitting a new plug
If for any reason you need to fit a new plug, the flexible mains lead must
be connected as shown below. The wires in the mains lead fitted to this
appliance are coloured in accordance with the following code:
Brown wire = Live (L)
Blue wire = Neutral (N)
Green & Yellow = Earth (E)
Connect Green
& Yellow to
Earth (E)
Connect
Brown to
Live (L)
