If colours of the wires in the mains lead of this appliance do not
correspond with the coloured marking identifying the terminals in your
plug, proceed as follows:The wire which is coloured Blue must be
connected to the terminal which is marked with the letter N or coloured
Black. The wire which is coloured Brown must be connected to the
terminal which is marked with the letter L or coloured Red. The wire
which is coloured Green & Yellow must be connected to the terminal
which is marked with the letter E or coloured Green.Before refitting the
plug cover check that there are no cut or stray strands of wire inside the
plug. Use a 13 Amp BS 1362 fuse, only BSI or ASTA approved fuses
should be used. If you are in any way unsure which plug or fuse to use,
always refer to a qualified electrician.
Note: After replacing or changing a fuse on a moulded plug which has a
fuse cover, the cover must be refitted to the plug, the appliance must
not be used without a fuse cover.
Technical Data
Voltage
:
220 - 240V AC 50Hz
Rated power
:
650 W
Model : SDA1075
Waste electrical products should not be disposed of with household
waste. Please recycle where facilities exist. Check with your Local
Authority or retailer for recycling advice.
Hairy Bikers
®
is a Registered Trade mark.
Produced and imported by Europasonic
(UK) Ltd.
Manchester M3 1JS
www.europasonic.com
Connect
Blue to
Neutral (N)
Ensure the outer sheath
is securely held by the
cord clamp
