of the mixture in order not to mix the yeast with water, salt and sugar, it
is important that the yeast does not come into contact with the wet
ingredients; otherwise the dough will not rise well enough.
•
Close the lid on the bread maker.
•
Insert the mains plug (with dry hands) into the mains socket, the unit will
beep to confirm it has powered up. The LCD display will show “MENU 1
TIMER 3:25”.
•
Select the menu option desired (1–12) by pressing the Menu button, the
display will show the menu option selected on the centre left of the
display.
•
Select the loaf size (1-3) that is to be made by pressing the Loaf button.
NB
the three loaf size options are only available on menu options 1, 2,
3 and 4.
•
Select the loaf colour (1-4) that is required by pressing the Colour
button.
NB
the four loaf colour options are only available on menu
options 1, 2, and 3.
•
If desired the running time of each menu option can be increased or
decreased using the Time + or Time – buttons.
•
Once the desired Menu, Loaf size, Loaf colour and running times have
been set press the start/stop button to start the machine and the bread
making process. To cancel the program, press the start/stop button
again.
NB
Refer to the cooking chart below for further guidance.
•
Once the baking is complete, the display will show 0:00 and the bread
maker will beep several times and go into keep warm mode for one
hour. The symbol “:” will continue to flash.
After keeping warm for 1
hour, the appliance will beep again and the symbol “:” will stop flashing
and the program will return to its initial standby state. To cancel the
keep warm mode, press the start stop button for 1 second.
•
After the program has finished, unplug from the mains socket before
taking out the bread. Using oven gloves or similar, pull the bread pan
straight out of the machine.
Dough function
Dough function operation is the same as the bread making function,
except that this program does not bake the bread.
Baking function
This function can be used to bake bread or other baked goods.
Follow this procedure:
