Section 4 - Stroller Assembly Continued
7
8
4
.
Canopy Assembly:
A. Position stroller seat on the ground as shown.
Attach canopy clips to seat on both sides.
B. To remove the front wheel assembly, push the
red button on top of the front wheel assembly
and pull off the front wheel assembly.
2
.
Front Wheel Assembly:
A. Locate a front wheel assembly and push the red
button on top and firmly push on the wheel
assembly until it ‘clicks’ . Repeat for the
other side.
NOTE:Pull down on each wheel to ensure it is
attached.
B. To remove the rear wheel assembly, push the
button and pull off the rear wheel
assembly .
3
.
Rear Wheel Assembly:
A. Locate a rear wheel assembly. Push in the button
and slide rear wheel assembly pin into the rear
wheel housing . Repeat for the other side.
NOTE:Pull out on each wheel to ensure it is
attached.
2
1
1
1
1
2
2
2
Section 4 - Stroller Assembly Continued
C. To remove the canopy, rotate c-clip and pull.
Detach the hook and loop fasteners.
B. Attach hook and loop fasteners on each side of
canopy to the seat.
B. To remove bumper bar, push button to release
bumper bar and pull to remove.
A. To attach bumper bar, align ends on bumper
bar and push into holes until it clicks.
NOTE: Pull up on each side of bumper bar
to ensure it is attached.
5
.
Bumper Bar Assembly:
1
2
2
1
1
2
1
2
