Section 5 - Stroller Operation and Use - Continued
15
16
Section 5 - Stroller Operation and Use - Continued
10. To attach the Chicco infant car seat:
A. Unbuckle the webbing strap over the infant car
seat. Pull release handle on back of infant
car seat. Pull up on infant car seat to
remove.
11
.
To remove the Graco infant car seat:
A. To remove the toddler seat from the stroller frame,
slide release buttons and lift off seat
from the frame.
1
2
C. Lower the infant car seat adapter onto the hinges
until it clicks. Infant car seat adapter can be installed
forward or rear facing.
Note: Pull up on the infant car seat adapter to
ensure it is attached.
Use only the following Chicco infant car seats with the infant
car seat adapter:
• Chicco KeyFit
™
• Chicco KeyFit
™
30
WARNING
1
2
D. Lower the Chicco infant car seat into the infant car
seat adapter until it clicks.
Note: Pull up on the Chicco infant car seat to
ensure it is attached.
B. Locate the infant car seat adapter and rotate
arms until they lock into place.
E. Route buckle webbing through the belt path on
both sides of the infant car seat . Attach the
buckle . Tighten strap so that the infant car
seat is held tightly.
1
2
3
1
2
1
2
1
2
2
3
1
Note: To fold up infant car seat adapter, push release
button and rotate arm up.
Repeat for other side.
1
2
To remove infant car seat adapter
Pull on release tab and pull up adapter .
1
2
2
1
