Section 5 - Stroller Operation and Use - Continued
13
14
Section 5 - Stroller Operation and Use - Continued
8
.
To attach the Graco infant car seat:
A. Unbuckle the webbing strap over the infant car
seat. Pull release handle on back of infant
car seat. Pull up on infant car seat to
remove.
9
.
To remove the Graco infant car seat:
A. To remove the toddler seat from the stroller frame,
slide release buttons and lift off seat
from the frame.
1
C. Lower the infant car seat adapter onto the hinges
until it clicks. Infant car seat adapter can be installed
forward or rear facing.
Note: Pull up on the infant car seat adapter to
ensure it is attached.
To remove infant car seat adapter
Pull on release tab and pull up adapter .
Use only the following Graco infant car seats with the infant
car seat adapter:
• Graco SnugRide
®
• Graco SnugRide 32
®
• Graco SnugRide 35
®
WARNING
1
2
D. Lower the Graco infant car seat into the infant car
seat adapter. The Graco infant car seat should latch
onto adapter shown in the detail view.
Note: Pull up on the Graco infant car seat to
ensure it is attached.
1
2
B. Locate the infant car seat adapter and rotate
arms until they lock into place.
E. Route buckle webbing through the belt path on
both sides of the infant car seat . Attach the
buckle . Tighten strap so that the infant
car seat is held tightly.
1
2
3
Note: To fold up infant car seat adapter, push release
button and rotate arm up.
Repeat for other side.
1
1
2
2
2
1
2
2
1
1
2
2
3
2
1
