GD3 1200
This model has one
gas injector at the
right hand side of
the burner tray.
21-3-2017 VERSION 4 Page of
5
20
LPG
Natural Gas
• Remove the stainless steel burner end
caps (2 x screws on each cap) at either
end of the burner tray.
• Remove the burner tray by carefully
pushing it away from the pilot and lift the
pilot end of the burner tray, lift the burner
tray up and away from the pilot in one
movement.
• Stand the burner tray on its end and lean
against a stable surface.
• Remove the stainless steel burner end caps (2 x screws on each
cap) at either end of the burner tray.
• Remove the burner tray by carefully pushing it away from the pilot
and lift the pilot end of the burner tray, lift the burner tray up and
away from the pilot in one movement.
• Stand the burner tray on its end and lean against a stable surface.
GD3 1500
This model has two
gas injectors at the
right and left hand
sides of the burner
tray.
• Remove the stainless steel burner end
caps (2 x screws on each cap) at either
end of the burner tray.
• Remove the burner tray by carefully
pushing it away from the pilot and lift the
pilot end of the burner tray, lift the burner
tray up and away from the pilot in one
movement. Ensure that the gas injector at
the left hand side is not damaged as the
burner tray is lifted out.
• Stand the burner tray on its end and lean
against a stable surface.
Burner Tray Removal Process
• Remove the stainless steel burner end caps (2 x screws on each
cap) at either end of the burner tray.
• On the left hand side gas injector, loosen and spin back the 12mm
brass nut
closest to the burner tray.
LH Gas Injector
• Remove the burner tray by carefully pushing it away from the pilot
and lift the pilot end of the burner tray, lift the burner tray up and
away from the pilot in one movement.
• Stand the burner tray on its end and lean against a stable surface.
GD3 1600
This model has two
gas injectors at the
right and left hand
sides of the burner
tray.
• Remove the stainless steel burner end
caps (2 x screws on each cap) at either
end of the burner tray.
• Remove the burner tray by carefully
pushing it away from the pilot and lift the
pilot end of the burner tray, lift the burner
tray up and away from the pilot in one
movement. Ensure that the gas injector at
the left hand side is not damaged as the
burner tray is lifted out.
• Stand the burner tray on its end and lean
against a stable surface.
• Remove the stainless steel burner end caps (2 x screws on each
cap) at either end of the burner tray.
• On the left hand side gas injector, loosen and spin back the 12mm
brass nut
closest to the burner tray.
LH Gas Injector
• Remove the burner tray by carefully pushing it away from the pilot
and lift the pilot end of the burner tray, lift the burner tray up and
away from the pilot in one movement.
• Stand the burner tray on its end and lean against a stable surface.
Summary of Contents for GD3
Page 1: ...GD3...
