Meas.
Temp.
Anlg O
DIAG.
Voltages
Relays
Anlg. Out
Time/Date
HOLD
Features
Meas. Title
Special
Head
Used to calibrate unit. Can use up to 30 samples.
Selected when Temp. Compensating the E-Scan or wanting to
modify the table. (see manual before attempting).
Used as a zero adjust, centered at 2047. Will have a range of 1433 -
2661 or 3.00 volts of meas. Voltage (409 counts/volt).
Displays measurement voltages both compensated and not
compensated. Temperature voltage from sensing head and lamp
voltage.
Can cycle the Meas., Temp., Drain, and Clean relays and see status of
custom inputs.
Used to cycle the 4-20mA output from 4-12-20mA and calibrate for
best chart recorder accuracy.
Used to set system time and date.
Used to hold present reading.
Used to select Purge/Hold, Smart Clean, Alarm A Failsafe, Alarm B
Failsafe.
Used to name the current measurement units.
Password protected. Used to select PID Control, Dual Meas.
Alarm, Remote Auto Mode for PID or Isolation Valve, Demand
Purge, or Hold and to enable password protection
for calibration and compensation. Also used for multi-language
selection.
Password protected. Used to select head type and head temp.
CONFIG.
Page 2 of 3
