MPR
E-S
CAN
OPERATION
/
CONFIGURATION
The next available configuration menu option “
Decimal”
activates the following display:
The decimal place option allows the
operator to configure various
measurement readout formats.
When selected, all measurement
readings as well as calibration limits
will reflect the chosen format. The
format chosen will depend on the
resolution desired by the operator.
NOTE:
The decimal format affects
displayed readings only. Maximum
resolution
is
still
maintained
internally for accurate output.
Choosing the
“Meas.
Title”
configuration option will activate the following display:
This is the measurement title alphabet
menu. It displays the alphabetic
characters available for designating a
title, and the measurement title itself
at the bottom which is updated as
characters are selected.
Using the Front Panel
ARROW
and
ENTER
buttons a measurement
title can be selected and then saved.
The “
PgDn”
and “
PgUp”
messages at
the top right indicate the status of the
editing mode. Toggling between these
modes allows the operator to move
the edit cursor to a desired position either in the alphabet or the measurement title. When the
“
-Save-”
option is selected, all characters from the edit cursor position in the measurement title
onward are erased, thus saving only the measurement title characters that precede the edit cursor
position.
Decimal Setup Screen
Configuration Measurement Title Screen
2-17
