Room
Selecting the virtual room to which the device is
assigned
High temperature alarm
If active, detector will react if temperature is 60°C
and higher
Rapid temperature rise alarm
If active, detector will react on rapid temperature
rising (30°С for 30 minutes or less)
Alert with a siren if smoke detected
If active, HomeSiren and StreetSiren are activated in
case of smoke alarm
Alert with a siren if temperature threshold
exceeded
If active, HomeSiren and StreetSiren are activated in
case if temperature threshold exceeded
Alert with a siren if rapid temperature rise
detected
If active, HomeSiren and StreetSiren are activated in
case if rapid temperature rise detected
Signal Strength Test
Switches the device to the signal strength test mode
FireProtect self-test
Starts FireProtect self-test
User Guide
Opens the detector User Guide
Unpair Device
Disconnects the sensor from the hub and deletes its
settings
Indication
Event
Indication
Detector switch on
LED lights up green for 1 second
Detector switch off
The logo blinks red three times and the device
switches off
Registration failed
The logo blinks greed for a minute, then the
device switches over to the autonomous mode
Detector detected smoke contamination and
temperature increase
The siren switches on, the logo lights red until
the end of the fire/smoke detection
Battery low
One short sound signal per 90 sec - main
batteries low (CR2)
Two short sound signals per 90 sec -
backup battery low (CR2032)
Three short sound signals per 90 sec - all
the batteries low
Performance testing
