within 60
–90 min at carbon oxide concentration 50 ppm / 0.005%
within 10
–40 min at CO concentration 100 ppm / 0.01%
within 3 min at carbon oxide concentration 300 ppm / 0.03%.
You can deactivate the siren in case of smoke/inflammation detection by pressing the touch-
sensitive button in the center of the detector's logo and via the Ajax Security System application.
If the smoke level and temperature do not return to normal, then FireProtect will activate the
siren again after 10 minutes.
Connecting the Detector to the Ajax Security System
Connecting to the hub
Before starting connection:
Following the hub instruction recommendations, install the Ajax application on your
smartphone. Create an account, add the hub to the application, and create at least one
room.
Go to the Ajax application.
Switch on the hub and check the internet connection (via Ethernet cable and/or GSM
network).
Ensure that the hub is disarmed and does not start updates by checking its status in the
mobile application.
⚠
️
Only users with administrative privileges can add the device to the hub.
How to connect the detector to the hub:
1. Select the
Add Device
option in the Ajax application.
2. Name the device, scan/write manually the
QR Code
(located on the body and packaging),
and select the location room.
