9
8
Digital kitchen scale
Digital kitchen scale
Battery symbol
➜
Change the battery
Display “Lo”
➜
Change the battery
Display “EEEE”
➜
Overload (max. 5 kg)
Display “unSt”
➜
Surface is not flat
Incorrect indication
➜
Change the battery
If your device fails to work despite these measures, contact the retailer where you purchased the product.
12. Waste disposal
This product has been manufactured using high-grade materials and components which can be recycled
and reused.
Never dispose of empty batteries and rechargeable batteries with ordinary household waste.
As a consumer, you are required by law to take them to your retail store or to an appropriate
collection site depending on national or local regulations in order to protect the environment.
This product is labelled in accordance with the EU Waste Electrical and Electronic Equipment
Directive (WEEE).
Please do not dispose of this product in ordinary household waste. As a consumer, you are
required to take end-of-life devices to a designated collection point for the disposal of electri-
cal and electronic equipment, in order to ensure environmentally-compatible disposal.
13. Specifications
Weighing performance
5 g up to max. 5000 g
Unit weight
g =>lb:oz =>oz =>ml
Resolution
1 g, 0.1 oz, 0.05 oz, 1 ml
Power consumption
Button cell battery 1 x CR 2032 (included)
Dimensions
155 x 200 x 15 mm
Weight
169 g (device only)
5. Elements
(Fig. 1+2)
A 1:
Weight display
A 2:
ON/OFF TARE
button
A 3:
UNIT
convert button
A 4:
Battery compartment
A 5:
Support for wall mounting (fold out)
6. Getting started
• Open the battery compartment and remove the battery insulation strip.
• Close the battery compartment again.
• All segments will be displayed briefly. 0 g (default) appears on the display.
• The scale is now ready to use.
7. Setting of the weight unit
• Press the
UNIT
button and change between g =>lb:oz, lb:oz=>oz, oz=>ml, ml=>g as the desired weight
unit.
8. Use of the scale
• Place the scale on a flat solid surface.
• In order to switch on the scale, press the
ON/OFF TARE
button.
• All segments will be displayed briefly.
• An soon as “0” appears on the display you can start to weight.
• Place the weight in the middle of the surface.
• To switch off the instrument, press and hold the
ON/OFF TARE
button for two seconds.
• When the scale is not used, it will automatically switch off after approx. 2 minutes.
9. Tare function
• If you use a bowl for measuring, please put at first the bowl on the platform and then turn on the scale
with the
ON/OFF TARE
button. Is the scale already in use, press the
ON/OFF TARE
button to reset the dis-
play to “0” .
• If you want to measure more than one ingredient in the same bowl, press the
ON/OFF TARE
button before
you put the new ingredient into the bowl. The display always goes back to “0” and you can continue the
measuring process without problems.
10. Care and maintenance
• Clean the device with a soft damp cloth. Do not use solvents or scouring agents.
• Remove the battery if you do not use the device for a long period of time.
• Keep the device in a dry place.
10.1 Battery replacement
• Change the battery when the empty battery symbol appears on the upper left display edge or “Lo”.
• Open the battery compartment and insert a new battery CR2032.
• Make sure the polarities are correct (+pole above).
• Close the battery compartment again.
11. Troubleshooting
Problem
Solution
No display
➜
Press the
ON/OFF TARE
button to switch on the instrument
➜
Ensure that the battery polarity is correct (+pole above)
➜
Change the battery
TFA_No. 50.2003_Anleitung 26.03.2019 10:44 Uhr Seite 5
