23
22
METEO MAX
- Wireless weather station
METEO MAX
- Wireless weather station
• Relative pressure is referred to sea level’s pressure and has to be adjusted first to your local altitude. Ask for the present
atmospheric pressure of your home area (Local weather service, www, optician, calibrated instruments in public buildings,
airport). Hold
Relative/Absolute
button for 3 seconds. Press
▲
or
▼
key to adjust, press
Relative/Absolute
button to
confirm.
• Press
HISTORY/WEATHER
button to view the past 12 hours barometric pressure history. The hour is indicated on the LCD
(0, -1, -2…-12).
• Hold
▲
button for three seconds to select inHg or mb / hPa as the unit for barometric pressure .
7.4.3 Development of atmospheric pressure
• The bar graph indication of atmospheric pressure shows the last 12 hours.
7.4.4 Meteo Max
• Weather forecast by “Meteo Max”: Swimming trunks, scarf, gloves or umbrella? Max shows in 22 variations always the
correct clothes for the current weather.
• Please keep in mind that the clothing of Meteo Max is based on the information of the transmitter received on channel 1. If
this transmitter is not situated outside or if there is no transmitter connected to channel 1, a wrong or no display will be the
result.
7.5 Sun and moon
7.5.1 Sunrise/Sunset and Moonrise/Moonset time
• After setting local country and city in the setting mode, the main unit calculates the time for the sunrise/sunset and moon-
rise/moonset.
• Press
SUN/MOON
button to display the sun hours of the selected day.
• Hold
SUN/MOON
button for 3 seconds to enter the quick checking mode. Location digits blink and you can select your
setting by
+(12/24)
and
–
buttons. Enter “Country”, "City”, “Year”, “Month” and “Day” which you would like to check by
pressing
SUN/MOON
button.
• The location digits keep blinking to indicate the main unit is still in quick checking mode. Press
SUN/MOON
button to return
to normal mode.
• The instrument will quit the quick checking mode and return to the home location if there is no button used within 15
seconds.
• If moonrise or moonset occur at the next day “MO1” or “M1” will be displayed.
• If there is no moonrise or moonset on that day, "-:--" will be displayed on the LCD.
7.5.2 Moon phase display
• The moon phase of each day is shown on the LCD:
7.2 Alarm clock function
• Select your desired alarm by
MODE
button:
1. Alarm 1
2. Alarm 2
• Set the alarm time in the desired alarm mode. Hold
MODE
button for 3 seconds. The hour digits are flashing. Press
+(12/24)
or
–
button to adjust the time. Confirm with
MODE
button. Set minutes in the same way.
• To activate or deactivate the alarm function press
AL ON/OFF
in the respective alarm mode. “ON” or "OFF” appears on the
display.
• Once the alarm starts to ring, you can stop the alarm by pressing
MODE
,
+(12/24)
,
–
or
SUN/MOON
button.
7.3 Thermometer and hygrometer
7.3.1 Display change
• Press
▲
(°C/°F)
button to change between °C or °F as temperature unit.
7.3.2 Trend pointer
• The trend pointer displayed on the LCD indicates if the outdoor temperature is increasing, steady or decreasing.
7.3.3 Maximum/Minimum function
• Press
MAX/MIN
button to show the maximum (MAX) values of temperature and humidity of the indoor transmitter and
outdoor temperature. Press
MAX/MIN
button again to show minimum (MIN) values.
• Hold
MAX/MIN
button for 3 seconds to clear the recorded maximum and minimum reading.
7.4 Atmospheric pressure
7.4.1 Weather forecast symbols
• There are 5 different weather symbols (sunny, slightly cloudy, cloudy, rainy, heavy rain) and 3 different symbols for the
trend of atmospheric pressure ( increasing, steady, decreasing). A snow crystal is shown if rain is forecasted and the out-
door temperature is under 0°C.
7.4.2 Absolute and relative atmospheric pressure
• Press
Relative/Absolute
button to select Absolute ("Abs”) or Relative ("Rel”) pressure display.
• Absolute pressure is the actual atmospheric pressure measured by the main unit.
TFA_No. 35.1066_Anleitung 11.11.2016 11:47 Uhr Seite 12
