Upstream Conveyor
This feature is for the control of a feeder conveyor. When wired properly, this can start and stop the
conveyor with the seal head (Indexing ON) or let the conveyor run continuously (Indexing OFF). Turn the
feature ON/OFF by pressing the RAISE or LOWER button.
To return to the previous screen press the EXIT button. To return HOME, press the button directly below
the label HOME. You may also press the button directly under the label HELP to see on-screen
instructions.
Constant Run Conveyor
The purpose of this feature is to increase product output when upstream product gaps are large. With this
feature enabled, the infeed conveyor will continue to run while the seal bar is closed and sealing. If the
upstream gaps are not big enough, the spacing will quickly become too small and machine errors will
occur. Turn the feature ON/OFF by pressing the RAISE or LOWER button.
NOTE: The conveyor will stop if the photo eye is blocked.
27
