Seal Compensation
As the machine cycles, the seal pad will begin to warm up from coming in contact with the hot seal knife.
When the seal pad warms up to a certain amount, the seal time necessary to make a good seal diminishes.
The Seal Compensation parameter allows the cycle time to slightly increase based off of observations of
the seal time and amount of time required to heat up the seal pad. Turn the feature on by entering a 1 into
the parameter box.
Time Window
is the amount of time before the Seal Compensation will begin. This should be the amount
of time the user notes that the seal pad is now warm enough to lessen the seal time.
Seal Quantity
is the number of seals that the user wants to see happen in the Compensation Time
Window. If the number of seals specified does not happen, the compensation will not begin. Once both
parameters are met the compensation will begin. It will lessen the seal time by the amount specified in the
next screen
Quick Seal
.
Press the PREV (UP) or NEXT (DOWN) button to highlight the setting to change. The user may press
the RAISE or LOWER button to adjust the value or to ENABLE/DISABLE a desired setting. Press
ENTER when done.
To return to the previous screen press the EXIT button. To return HOME, press the button directly below
the label HOME. You may also press the button directly under the label HELP to see on-screen
instructions.
24
