Tail Remover
The purpose of this feature is to help remove the corner strip of film that sometimes develops in the corner
of the ‘L’ seal. This is accomplished by stopping
the film pull chains and keep the outfeed conveyor
running (for the specified amount of time) to turn the product slightly. This will allow the seal bar to cut a
clean corner away from the scrap section. This works best with heavier products. For proper machine
operation, this number should be kept to a minimum.
NOTE: This timer will add to the Rear Bag setting slightly.
Press the RAISE or LOWER button to adjust the value, or type in a desired setting. When done press
ENTER.
To return to the previous screen press the EXIT button. To return HOME, press the button directly below
the label HOME.
19
