Front and Rear Bag Settings
Front Bag Timer
Front bag is the amount of bag in front of the package. When the Run button is pressed, or after each seal
cycle, this will be the amount of film pulled.
Press the PREV (UP) or NEXT (DOWN) button to highlight the setting to change. The user may press
the RAISE or LOWER button to adjust the value, or type in a desired setting. When done press ENTER.
Rear Bag Timer
Rear Bag is the amount of bag at the rear of the package. After the product clears the staging eye, this
counter begins. This will be the amount of film pulled after the staging eye is cleared.
Press the PREV or NEXT button to highlight the setting to change. The user may press the RAISE or
LOWER button to adjust the value, or type in a desired setting. When done press ENTER.
(NOTE: Since these are time values, the bag size will change if the conveyor speed is adjusted.
Therefore be sure to adjust these values if conveyor speed is increased or decreased).
To return to the previous screen press the EXIT button. To return HOME, press the button directly below
the label HOME.
13
