Print Registration
These parameters are for use with printed film. Additional equipment will be necessary to use this feature.
Press the PREV (UP) or NEXT (DOWN) button to highlight the setting to change. The user may press
the RAISE or LOWER button to adjust the value or to ENABLE/DISABLE a desired setting. Press
ENTER when done.
OFFSET TIME is an amount of time the machine will advance the film after the film sensor has detected a
register mark. This is so the user can properly place the product with the printing on the film. A zero
setting would stop the film pull at the register mark.
To return to the previous screen press the EXIT button. To return HOME, press the button directly below
the label HOME.
26
