Textron EZGO Workhorse ST 350, Owner'S Manual And Service Manual

Page: 47 / 72

OPERATION AND SERVICE INFORMATION
3-39
Read all of manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notes, Cautions and Warnings
HARDWARE
Periodically, the vehicle should be inspected for loose fasteners. Fas-
teners should be tightened in accordance with the Torque Specifica-
tions table (Ref Fig. 43 on page 3-39).
Use care when tightening fasteners and refer to the Technician’s
Repair and Service Manual for specific torque values.
Generally, three grades of hardware are used in the vehicle. Grade 5
hardware can be identified by the three marks on the hexagonal head
and grade 8 hardware is identified by 6 marks on the head. Unmarked
hardware is Grade 2 (Ref Fig. 43 on page 3-39).
Fig. 43 Torque Specifications and Bolt Grades
ALL TORQUE FIGURES ARE IN FT. LBS. (Nm)
BOLT SIZE
Grade 2
1/4" 5/16" 3/8" 7/16" 1/2" 9/16" 5/8" 3/4" 7/8" 1"
Unless otherwise noted in text, tighten all hardware in accordance with this chart.
This chart specifies 'lubricated' torque figures. Fasteners that are plated or lubricated when
installed are considered 'wet' and require approximately 80% of the torque required for 'dry' fasteners.
4
(5)
8
(11)
15
(20)
24
(33)
35
(47)
55
(75)
75
(102)
130
(176)
125
(169)
190
(258)
Grade 5
Grade 8
6
(8)
13
(18)
23
(31)
35
(47)
55
(75)
80
(108)
110
(149)
200
(271)
320
(434)
480
(651)
6
(8)
18
(24)
35
(47)
55
(75)
80
(108)
110
(149)
170
(230)
280
(380)
460
(624)
680
(922)
BOLT SIZE
Class 5.8
(Grade 2)
M4 M5 M6 M8 M10 M12 M14
1
(2)
2
(3)
4
(6)
10
(14)
20
(27)
35
(47)
55
(76.4)
Class 8.8
(Grade 5)
2
(3)
4
(6)
7
(10)
18
(24)
35
(47)
61
(83)
97
(131)
Class 10.9
(Grade 8)
3
(4)
6
(8)
10
(14)
25
(34)
49
(66)
86
(117)
136
(184)
5.8
8.8
10.9