OPERATION AND SERVICE INFORMATION
3-8
Read all of manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notes, Cautions and Warnings
If the vehicle is being used as an anchor to winch a load, it
should have the park brake set and chocks installed on all
wheels.
Never use the winch to lift people or other overhead loads.
Do not use the winch to secure loads. Use a tie down
designed for the job.
Do not apply shock loads to the winch.
Do not attempt to modify or weld the winch.
CONTROLS AND INDICATORS
Vehicle controls and indicators consist of:
• key/light switch
• direction selector
• choke
• fuel gauge
• low oil pressure indicator light
• accelerator pedal
• combination service and park brake pedal
• horn
KEY/LIGHT SWITCH
Located on the dash panel, this switch enables the basic electrical sys-
tem of the vehicle to be turned on and off by turning the key. To prevent
inadvertent operation of the vehicle when left unattended, the key
should be turned to the ‘OFF’ position and removed (Ref Fig. 9 on page
3-8).
If the vehicle is equipped with lights, the key switch has a position to
operate them, indicated by the light icon.
If the vehicle is equipped with factory installed cus-
tom accessories, some accessories remain opera-
tional with the key switch in the ‘OFF’ position.
Fig. 9 Key/Light Switch, Low Oil Pressure Light and Fuel Gauge
OFF
OFF
ON
ON
FUE
L
F
E
Low Oil Pressure
Indicator Light
Key/Light Switch
Fuel
Gauge
Summary of Contents for EZGO Workhorse ST 350
Page 1: ...OWNER S MANUAL SERVICE GUIDE Starting Model Year 2003 R...
Page 60: ...5 6 LIMITED WARRANTY Notes...
Page 62: ...6 2 DECLARATION OF CONFORMITY Notes...
Page 71: ......
