Textron EZGO Workhorse ST 350, Owner'S Manual And Service Manual

Page: 15 / 72

OPERATION AND SERVICE INFORMATION
3-7
Read all of manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notes, Cautions and Warnings
Never work around the winch drum or the winch cable
while it is under tension.
Unplug the winch switch before working on the winch
drum in order to prevent inadvertent operation.
When operating winch, take up slack slowly. Stop winch
before cable becomes tight and inspect all winching con-
nections. Check winch attachment, hook attachment,
nylon sling (if required) and load attachment.
Do not pull at an angle. This will cause the wire cable to
pile up on one end of the winch. This may jam the winch
causing damage to the cable and/or the winch. Pulling the
vehicle at an angle can cause damage to the front suspen-
sion and may cause the vehicle to overturn. When pulling
vehicle, pull straight only (Ref Fig. 8 on page 3-7).
Fig. 6 Do Not Hook Cable to Itself
Fig. 7 Use a Nylon Sling and
Install a Damper when Winching
Nylon
Sling
Damper
Fig. 8 Do Not Pull at Angle
Correct
Incorrect