ADVANCED SETUP
PAGE 21
NOTES
1. For the Main Sensor and Room sensors, Alarms can be set for movement, light, sound
and temperature. For the Door Sensors and the Pendants, Alarms can be set for
movement only.
2. When a time stamp is more than 23 hours old it will be replaced with --:--
3. For simplicity, all text is not case sensitive.
4. Send the text: #DEFAULT to clear all sensors, phone numbers, alarms and report times.
SETUP ALERTS
An Alert is a condition you do not set but do have to enable. NB If you have enabled
logging to the web, all Alerts can be easily setup from the web page.
SETTING ALERTS BY TEXT FROM A PHONE
A number of Alert conditions can be enabled which will automatically trigger a TEXT to
be sent. The Main Sensor, Pendant and Door Sensors all have a CALL FOR HELP button
which, when not enabled, allow setup and display features. However, when enabled
they act as a CALL FOR HELP button: when pressed an automatic TEXT will be sent to
the specified phone or phones.
Alerts can also be set to notify the carer should the mains power fail on the Main Sensor
and also if a FALL/DROP or OUT-OF-RANGE notification is detected by the PENDANT.
To set up the Alert conditions follow the sequence below. Remember to put a comma
between each parameter:
1) The alert command e.g. ALERT=
2) The sensor NAME e.g. Kitchen
3) The alert condition: H , P , F
