ADVANCED SETUP
PAGE 17
REGISTER YOUR PHONES
Add the TextCare SIM card phone number to your contacts ( eg
as TextCare or DAD’s house).
You must then register your phone (the primary user) to the
TextCare Main Sensor by sending the text #PHONE1 to that
number.
After a short time you will receive an acknowledge text back to
your phone.
To register additional phones, send the text #PHONE from each
phone you wish to add. TextCare will reply with a confirmation
TEXT to each stating its number (Phone number=2, Phone
number = 3, etc).
To read back the phone numbers in the TextCare Main Unit, send
the text #PHONE? from any phone, TextCare will send a text to
that phone showing phone number settings.
To delete a phone number text PHONE3# for phones 1 to 8
Registered to
TextCare Phone
Number #1
LOGOFF
Functions can be set up either by text message or online under ‘config’.
#PHONE?
PHONE NUMBERS
1 +447884123123
2 +447979321224
PHONE3#
CLOCK SETUP
The TextCare clock is set when a phone is registered which synchronises the TextCare
Main Sensor clock with that of the sending mobile phone, if the clock ever needs to be
reset simply resend the text.
SETUP SENSOR NAMES
TextCare has default names of Main and ROOM1, DOOR1, PENDANT1, etc for the
remote sensors. You can allocate your own descriptive names for each sensor so that
reports and alarms are more easily understood. We recommend renaming each sensor
to reflect its location. The names can only consist of letters and numbers up to a
maximum of 10 characters.
To rename Sensor1 to Kitchen for example, send the text
SENSOR1=Kitchen for sensors 1 to 9 where 1 in the Main Sensor
(Main on the TextCare display). Will rename sensor 1 to ‘kitchen’:
SENSOR1=Kitchen
