ADVANCED SETUP
PAGE 19
TextCare will send a text to your phone showing the report time
settings.
To delete a report time, send the text TIME1# where the hash (#)
represents delete. In this example you have deleted the first
report. You can do the same to delete other report times (1 to 9).
ALARM 1 Kitchen
NO-MOVE 06:00 to
09:00
TIME1#
SETUP ALARMS
An Alarm is a condition you set. The alarms you set will trigger
your TextCare system to send you warnings that something is
amiss. For example, you want to know whether your loved one is
up and about in the morning so you set an alarm to be notified if
no movement is detected in the kitchen by 09:00.
If movement is detected you will receive no alarm text. If no
movement is detected the following message will be sent:
SETTING ALARMS BY TEXT FROM A PHONE
The Main Sensor and Room Sensors monitor movement, temperature, light and sound.
The Door Sensors and Pendants monitor movement. To set up Alarm conditions, you will
first need to tell TextCare what you consider unusual or uncharacteristic conditions
using these criteria. You can set up to 9 alarms and for each alarm you can identify the
sensor, the activity that will trigger the alarm, the time window of concern and where to
send the Alarm text message.
To set up Alarm conditions follow the sequence below. Remember to put a comma
between each parameter:
1) The alarm number e.g. ALARM1= ALARMS 1 to 9 can be set
2) The sensor NAME e.g. Kitchen
3) The detection condition:
Move
if movement is detected between start and stop times, an alarm text is sent when
movement is seen.
NOMove
if no movement is detected between start and stop times, an alarm text is sent
at the end time.
