17
Installation guide
The following chapter explains how to install the TEXAS Robot Lawnmower.
Therefore, read this chapter thoroughly before planning and installing the boundary cable.
Introduction
It is recommended that you make a sketch of your lawn with the obstacles that you wish to
protect.
It will provide a good overview of the work in laying out the cable and for selecting the best
location for the charging station.
Draw the boundary cable from the charging station around the garden and around any
obstacles that you wish to protect, e.g. flower beds and trees.
Obstacles in the garden
Fixed obstacles in the garden that are higher than 100 mm, such as walls, hedges, garden
furniture, posts etc., do not need to be protected using the boundary cable, since the
robot’s obstacle sensors will register the encounter with the obstacle, enabling it to stop,
turn around and find a new direction of travel.
