manualshive.com logo in svg

Texas LMK04906B, Operating Instructions Manual

The Texas LMK04906B Operating Instructions Manual is a comprehensive and user-friendly guide designed specifically for this product. Easily download the manual for free at manualshive.com, ensuring that you have everything you need to operate your Texas LMK04906B efficiently and confidently.

Share
Download
background image

 

L M K 0 4 9 0 6   E V A L U A T I O N   B O A R D   O P E R A T I N G   I N S T R U C T I O N S  

 
 

 

 

SNAU126 

64 

EVALUATION BOARD/KIT/MODULE (EVM) ADDITIONAL TERMS 

 

Texas Instruments (TI) provides the enclosed Evaluation Board/Kit/Module (EVM) under the following 
conditions: 
 
The user assumes all responsibility and liability for proper and safe handling of the goods. Further, the 
user indemnifies TI from all claims arising from the handling or use of the goods. 
 
Should  this  evaluation  board/kit  not  meet  t

he specifications indicated in the User’s Guide, the board/ kit 

may  be  returned  within  30  days  from  the  date  of  delivery  for  a  full  refund.  THE  FOREGOING  LIMITED 
WARRANTY IS THE EXCLUSIVE WARRANTY MADE BY SELLER TO BUYER AND IS IN LIEU OF ALL 
OTHER WARRANTIES, EXPRESSED, IMPLIED, OR STATUTORY, INCLUDING ANY WARRANTY OF 
MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. EXCEPT TO THE EXTENT OF 
THE  INDEMNITY  SET  FORTH  ABOVE,  NEITHER  PARTY  SHALL  BE  LIABLE  TO  THE  OTHER  FOR 
ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES. 
 
Please read the User's Guide and, specifically, the Warnings and Restrictions notice in the User's Guide 
prior  to  handling  the  product.  This  notice  contains  important  safety  information  about  temperatures  and 
voltages.  For  additional  information  on  TI's  environmental  and/or  safety  programs,  please  visit 

www.ti.com/esh

 or contact TI. 

 
No license is granted under any patent right or other intellectual property right of TI covering or relating to 
any  machine,  process,  or  combination  in  which  such  TI  products  or  services  might  be  or  are  used.  TI 
currently  deals  with a  variety  of  customers for  products,  and  therefore  our  arrangement  with  the  user  is 
not  exclusive.  TI  assumes  no  liability  for  applications  assistance,  customer  product  design,  software 
performance, or infringement of patents or services described herein. 
 
 

Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265 

 

Copyright 2012, Texas Instruments Incorporated 

 

 
 

REGULATORY COMPLIANCE INFORMATION 

 
 

As  noted  in  the  EVM  User

’s Guide and/or EVM itself, this EVM and/or accompanying hardware may or 

may not be subject to the Federal Communications Commission (FCC) and Industry Canada (IC) rules. 
 
For  EVMs 

not

  subject  to  the  above  rules,  this  evaluation  board/kit/module  is  intended  for  use  for 

ENGINEERING DEVELOPMENT, DEMONSTRATION  OR  EVALUATION PURPOSES ONLY  and is not 
considered by TI to be  a finished end product fit for general consumer use. It generates,  uses, and can 
radiate  radio  frequency  energy  and  has  not  been  tested  for  compliance  with  the  limits  of  computing 
devices  pursuant  to  part  15  of  FCC  or  ICES-003  rules,  which  are  designed  to  provide  reasonable 
protection against radio frequency interference. Operation of the equipment may cause interference with 
radio  communications,  in  which  case  the  user  at  his  own  expense  will  be  required  to  take  whatever 
measures may be required to correct this interference. 
 

General Statement for EVMs including a radio 

 
User Power/Frequency Use Obligations: This radio is intended for development/professional  use only in 
legally allocated frequency and power limits.  Any use of radio frequencies and/or power availability of this 
EVM and its development application(s) must comply with local laws governing radio spectrum allocation 
and power limits for this evaluation module.  It is the user’s sole responsibility to only operate this radio in 
legally acceptable frequency space and within legally mandated power limitations.  Any exceptions to this 

Summary of Contents for LMK04906B








































































Reviews:

No comments

Related manuals for LMK04906B

Biostar G41D-M7 Setup Manual preview
G41D-M7
Brand: Biostar Pages: 47
MaxLinear MxL7704 Series Manual preview
MxL7704 Series
Brand: MaxLinear Pages: 25
Phytec phyCARD-M Hardware Manual preview
phyCARD-M
Brand: Phytec Pages: 128
Sapphire Audio FS-FP5V User Manual preview
FS-FP5V
Brand: Sapphire Audio Pages: 50
Phytec phyCORE-ADuC812 Quick Start Instructions preview
phyCORE-ADuC812
Brand: Phytec Pages: 86
MSI MS-6319 Manual preview
MS-6319
Brand: MSI Pages: 76
JETWAY BA-500PRO User Manual preview
BA-500PRO
Brand: JETWAY Pages: 58
Texas Instruments LMR38020EVM User Manual preview
LMR38020EVM
Brand: Texas Instruments Pages: 17
Analog Devices Linear DC2681A-A Demo Manual preview
Linear DC2681A-A
Brand: Analog Devices Pages: 8
ECS A55F-M2 V.2.0 User Manual preview
A55F-M2 V.2.0
Brand: ECS Pages: 74
Supero H8DCT-F User Manual preview
H8DCT-F
Brand: Supero Pages: 78
onsemi NB7NPQ1102MCMUGEVB User Manual preview
NB7NPQ1102MCMUGEVB
Brand: onsemi Pages: 7
MSI MICRO NLX BX4 User Manual preview
MICRO NLX BX4
Brand: MSI Pages: 91
Supermicro X10DRT-H User Manual preview
X10DRT-H
Brand: Supermicro Pages: 111
IDT 5P49V5907 Wiring Diagrams preview
5P49V5907
Brand: IDT Pages: 5
MiTAC PD10AI Product Manual preview
PD10AI
Brand: MiTAC Pages: 91
Texas Instruments TPS36Q1EVM User Manual preview
TPS36Q1EVM
Brand: Texas Instruments Pages: 24
Gigabyte GA-M61VME-S2 User Manual preview
GA-M61VME-S2
Brand: Gigabyte Pages: 88

Brands by name

Popular brands

Load more brands