manualshive.com logo in svg

Texas Memory Systems RamSan-325, User Manual, Page: 89 / 121

Share
Download
Texas Memory Systems RamSan-325 User Manual Download Page 89

 

 

 

RamSan-325/325c 

User’s Manual 

 

- 85 - 

 

Figure 7-3: Auto-Detect Error 

 
For more information regarding the settings appropriate for your 

application, please consult your fibre channel administrator.  
 

Important: 

Saving changes made from this menu causes the system to reset the 

Fibre Channel Controller, which may result in data corruption. TMS does 
not recommend changing the controller settings while the controller is 
actually transferring data. 

 

Note: 

Some HBAs do not support direct attach point-to-point operation. If you 
are having trouble with a direct attach connection in point-to-point mode, 

try changing the controller to arbitrated loop mode. This topology should 
not affect performance noticeably, and some HBAs may only support this 
mode. 

 

7.2 

 

Configuring High Availability 

The administrator can configure the RamSan’s Fibre Channel (FC) 

controllers to back each other up in case of a failure. There are five basic 
FC controller states. The following list details what these states mean, how 
a controller can end up in each state, and what a controller’s options are 

from the states: 
 

Primary (Active) 

This default state is the most basic state. In this state, the controller is 

not associated with any of the other FC controllers. The administrator can 
modify any controller setting from this state, and the effect will be local to 
this controller. This controller’s links are enabled and can be used to 

transmit and receive data. 
 

Summary of Contents for RamSan-325


























































































































Reviews:

No comments