RamSan-325/325c
User’s Manual
- 84 -
Via Text Management
•
From the Telnet Main Menu, select “Controller setup”
•
Select “Select controller”
•
Choose a controller from the sub-menu and press [ENTER]
Figure 7-2: Controller Setup via Text Management Interface
The top of this menu indicates the controller’s current settings.
To change the topology:
•
Select “Change topology”
•
Choose the controller’s topology from the sub-menu and press
[ENTER]
To change the link speed:
•
Select “Change link speed”
•
Choose the controller’s link speed from the sub-menu and press
[ENTER]
All modifications are visible at the top of the menu.
To save any changes:
•
Select “Save changes and exit”
Generally, selecting auto-detect for topology and link speed provides you
with the proper settings for your system. If the Controller Setup screen
displays these settings as “Unkn” (See Figure 7-3: Auto-Detect Error)
once you have saved the changes, you must configure the link speed and
topology manually.
Summary of Contents for RamSan-325
Page 1: ...TEXAS MEMORY SYSTEMS INC RamSan 325 325c User s Manual Version 2 2 ...
Page 11: ...RamSan 325 325c User s Manual 7 Figure 2 1 RamSan 325 Layout ...
Page 109: ...RamSan 325 325c User s Manual 105 Figure B 3 Power Supply Module Figure A 5 Memory Blade ...
Page 110: ...RamSan 325 325c User s Manual 106 Figure A 6 120 Gigabyte Replacement Hard Drive ...