manualshive.com logo in svg

Texas Memory Systems RamSan-325, User Manual, Page: 121 / 121

Share
Download
Texas Memory Systems RamSan-325 User Manual Download Page 121

 

 

 

RamSan-325/325c 

User’s Manual 

 

- 117 - 

Name array-state-notif 
Description  The disk array state has changed 
Includes 

Message 
 

 

 

Name fc-state-notif 
Description  A fibre channel controller state has changed 
Includes 

Message 

Device Number 

Disk State: 

-1  notImplemented  This indicates there may be an SNMP reporting 

problem 

 

0  noState 

N/A 

1 error 

N/A 

2  warn 

N/A 

3  good 

The FC controller is working properly. 

 

4  warnHigh 

The FC controller has detected some type of error; 

possibilities include: RX errors, CRC errors, and 

corrected ECC errors. 
 

5  errorHigh 

The FC controller is not functioning correctly; the 
controller has failed or detected uncorrected ECC 

errors. 

 

6  noDevice 

N/A 

7 notMonitored 

N/A 

 
 

 

 

Name lun-change-notif 
Description  The LUN table has changed 
Includes 

Message 

 

 

 

Name fc-config-change-notif 
Description  The configuration of a fibre channel controller has changed 
Includes 

Message 
Device Number 

 

 

 

Name system-message-notif 
Description  A system message 
Includes 

Message 
 

 

 

Summary of Contents for RamSan-325


























































































































Reviews:

No comments