manualshive.com logo in svg

Texas Memory Systems RamSan-325, User Manual, Page: 37 / 121

Share
Download
Texas Memory Systems RamSan-325 User Manual Download Page 37

 

 

 

RamSan-325/325c 

User’s Manual 

 

- 33 - 

Now, the front panel display 
indicates that the system is 

powering off. Depending on 
the system mode and the 

size of memory, this 
procedure may take a while. 

The front panel cycles 
between a power off status 

bar and an estimated time 
until the system completes 
the power off. 

 

 

Via Web Management 

To perform a manual shutdown via the web interface: 

•

 

Click on the “Management Control Processor” graphic 

•

 

Click on the “General Info” tab 

 

Press the “Shutdown” button. 
 

Via Text Management 

To perform a manual shutdown via Text Management Interface: 

•

 

From the Telnet Main Menu, select “Power down system” 

•

 

Confirm the power down. 

 

Once the user confirms the power down, the system powers off 
after completing all writes.  

 
To resume operation, press the “Power” button to the left of the 

power supplies. For additional details, see Section 2.7 – Turning on 
the System. 

4.4.2

 

Automatic shutdown 

In the event that the system senses a high system temperature, 
power out of specs, or AC power is lost, the system will 
automatically initiate the shutdown procedure. 

 

*** Powering Off *** 

 

 

Summary of Contents for RamSan-325


























































































































Reviews:

No comments