manualshive.com logo in svg

Texas Memory Systems RamSan-325, User Manual, Page: 43 / 121

Share
Download
Texas Memory Systems RamSan-325 User Manual Download Page 43

 

 

 

RamSan-325/325c 

User’s Manual 

 

- 39 - 

Status   

The following status levels are possible: 

“GOOD”  
This is normal operation. 

 

“WARNING”  
Indicates that the RamSan 

has detected a system 
warning. Warning 

statements scroll across 
the front panel display. 
 

Possible warning 
examples: 

•

 

Pwr supply # removed 

•

 

AC lost at one or both 

power supplies 

•

 

One or both batteries 

are low 

•

 

Temperature warning 

•

 

One disk removed 

 

“ERROR”  
Indicates that the RamSan 

has detected a system 
failure. Error statements 

scroll across the front panel 
display. 

 
Possible failure examples: 

•

 

Fan failure 

•

 

Power supply failed 

•

 

System overheated 

•

 

More than one disk 
removed or failed. 

 

 

In the case of either system warnings or failures, the front panel 
display alternates between displaying status information and 

warning or failure messages every 10 seconds. 
 

System Status: 

GOOD 

System Status: 

WARNING 

Warnings: Fans slow 

System Status: 

ERROR 

Errors: Disk # Failed 

Summary of Contents for RamSan-325


























































































































Reviews:

No comments