background image

Related Documentation From Texas Instruments

vi

 

Related Documentation From Texas Instruments

Packaged with the XDS522 emulation system are:

XDS522 Emulation System Online Help (literature number SPRC003)

is an online help file that provides descriptions of the BTT software
user interface, menus, and dialog boxes.

TMS370C8 XDS522 Emulation System User’s Guide (literature num-

ber SPNU137) tells you how to use the XDS522

 emulation system

with the TMS370C8. This book describes the operation of the break-
point, tracing, and timing functionality in the XDS522 emulation sys-
tem. This book also discusses BTT software interface and includes a
tutorial that uses step-by-step instructions to demonstrate how to
use the XDS522 emulation system.

TMS370C16 XDS522 Emulation System User’s Guide (literature num-

ber SPNU147) tells you how to use the XDS522

 emulation system

with the TMS370C16. This book describes the operation of the
breakpoint, tracing, and timing functionality in the XDS522 emulation
system. This book also discusses BTT software interface and in-
cludes a tutorial that uses step-by-step instructions to demonstrate
how to use the XDS522 emulation system.

Packaged with the XDS522A emulation system are:

XDS522A Emulation System Online Help (literature number SPRC002)

is an online help file that provides descriptions of the BTT software
user interface, menus, and dialog boxes.

XDS522A Emulation System User’s Guide (literature number

SPRU169) tells you how to use the XDS522A

 emulation system.

This book describes the operation of the breakpoint, tracing, and tim-
ing functionality in the XDS522A emulation system. This book also
discusses BTT software interface and includes a tutorial that uses
step-by-step instructions to demonstrate how to use the XDS522A
emulation system.

Summary of Contents for XDS522





















































Reviews: