Step 6: Installing the Interface Adapter Pod
1-14
1.8
Step 6: Installing the Interface Adapter Pod
The interface adapter pod connects the XDS511 to the XDS522/XDS522A by
using the three 50-pin connectors on the front of the chassis (see Figure 1–10)
and the three woven cables on the interface adapter pod (see Figure 1–11).
For information about the trigger connector, see one of the following:
-
For the XDS522 when using a ’C8:
TMS370C8 XDS522 Emulation Sys-
tem User’s Guide
-
For the XDS522 when using a ’C16:
TMS370C16 XDS522 Emulation Sys-
tem User’s Guide
-
For the XDS522A:
XDS522A Emulation System User’s Guide
Figure 1–10. Front View of the XDS522/XDS522A
BTT–522
Timing Analysis System
TRIGGERS
50-pin connectors
Top
Middle
Bottom
Power indicator light
Trigger connector
