background image

User’s Guide

TPS23882B1EVM: PoE, PSE, TPS23882B1
Evaluation Module

ABSTRACT

This user’s guide describes the evaluation modules (EVM) for the TPS23882B1 (TPS23882B1EVM-008 and
BOOST-PSEMTHR8-097). The EVM contains evaluation and reference circuitry for the TPS23882B1. The
TPS23882B1 is a Power-over-Ethernet (PoE) device for power sourcing equipment (PSE).

Table of Contents

1 Description

..............................................................................................................................................................................

2

1.1 Features.............................................................................................................................................................................

2

1.2 Applications........................................................................................................................................................................

2

2 Quick Start

...............................................................................................................................................................................

3

2.1 Input Power........................................................................................................................................................................

3

2.2 PoE Port Interfaces............................................................................................................................................................

3

2.3 I

2

C Interfaces.....................................................................................................................................................................

3

2.4 Basic Test Setup Using Autonomous Mode.......................................................................................................................

4

2.5 Basic Test Setup Using USB2ANY for I

2

C Interface (Auto Mode or Semi-Auto Mode Operation with I

2

C Monitoring).....

5

2.6 Advanced Test Setup Using MSP-EX430FR5969 LaunchPad

 .......................................................................................

6

3 General Use Features

.............................................................................................................................................................

7

3.1 EVM Input/Output Connectors and Switches.....................................................................................................................

7

3.2 EVM LEDs..........................................................................................................................................................................

7

3.3 EVM Test Points.................................................................................................................................................................

8

3.4 EVM Test Jumpers.............................................................................................................................................................

9

4 TPS23882B1 GUI Setup

........................................................................................................................................................

10

4.1 TPS23882B1 GUI Installation..........................................................................................................................................

10

4.2 TPS23882B1GUI Operation.............................................................................................................................................

10

4.3 MSP-EXP430FR5969 Details..........................................................................................................................................

14

4.4 MSP430 Reference Code................................................................................................................................................

16

5 EVM Schematic, Layout Guidelines, PCB Assembly and Layer Plots

............................................................................

17

5.1 Schematic........................................................................................................................................................................

18

5.2 Layout Guidelines............................................................................................................................................................

21

5.3 PCB Drawings..................................................................................................................................................................

21

6 Bill of Materials

.....................................................................................................................................................................

26

Trademarks

LaunchPad

 and Code Composer Studio

 are trademarks of Texas Instruments.

All trademarks are the property of their respective owners.

www.ti.com

Table of Contents

SLVUC36 – APRIL 2021

Submit Document Feedback

TPS23882B1EVM: PoE, PSE, TPS23882B1

Evaluation Module

1

Copyright © 2021 Texas Instruments Incorporated

Summary of Contents for TPS23882B1EVM
































Reviews: