Texas Instruments TPS23882B1EVM, User Manual, Page: 9 / 31

3.4 EVM Test Jumpers
The EVM is equipped with shunts on the jumper positions identified in Table 3-4 , in the Default Pin Position
column. Shunts can be moved and removed, as required, during use.
Table 3-4. EVM Jumpers
Jumper
Default Pin
Position
Label Description
Motherboard: BOOST-PSEMTHR8-097
J27 1-2 P1 Two-pair port 1 LED bias
J28 1-2 P2 Two-pair port 2 LED bias
J16 1-2 P3 Two-pair port 3 LED bias
J15 1-2 P4 Two-pair port 4 LED bias
J26 1-2 P5 Two-pair port 5 LED bias
J25 1-2 P6 Two-pair port 6 LED bias
J14 1-2 P7 Two-pair port 7 LED bias
J13 1-2 P8 Two-pair port 8 LED bias
Daughterboard: TPS23882B1EVM-008
J4 1-2;3-4;5-6;7-8 A1;A2;A3;A
4
I2C A1-A4 address lines
J5 3-4 2P-30 W AUTO pin selection (autonomous mode is enabled if
connecting auto pin to ground with selected resistance, 2-pair
30-W operation is selected by default)
www.ti.com General Use Features
SLVUC36 – APRIL 2021
Submit Document Feedback
TPS23882B1EVM: PoE, PSE, TPS23882B1
Evaluation Module
9
Copyright © 2021 Texas Instruments Incorporated