Texas Instruments TMS320DM6437, Getting Started Manual, Page: 39 / 64

Rebuilding the Demo Target Software
Rebuilding DVDP Software 4-5
The dm6437_demo.out file was built with device driver instrumentation
turned off. However, pre-built instrumented versions of the driver libraries
have been provided with the DVSDK product. To use these instrumented
drivers, simply follow these steps:
1) Right-click on the demo project in CCStudio, and select the
Instrumented option.
2) Rebuild the demo application.
3) Use CCStudio to load and run the
dm6437_demo_x_xx_xx\Debug\dm6437_demo.out file.
4) Launch the SoC Analyzer by selecting Start->All Programs->Texas
Instruments->SoC Analyzer 1.0->SoC Analyzer.
5) In the SoC Analyzer Control Panel, enter the IP address that was
displayed in the CCStudio stdout window.
6) In the SoC Analyzer Control Panel, enter the path to the .out file.
7) You can then user the SoC Analyzer to start capturing log data and
analyzing the results. See the SoC Analyzer's online help for more
information.