Texas Instruments TMS320DM6437, Getting Started Manual, Page: 27 / 64

Running the Demos with the PC Host Application
Running the Demonstration Software 3-7
5) You can read log messages from the target-side application in the
Target Messages area:
6) To configure the application, you must first click Stop at the bottom
of the window. This makes the Control area active.
7) In the Mode area, select the mode in which you want to run the demo.
Then, go to the section indicated in this book for information on
choosing files for the mode you selected and running the demo.
„ Preview (also called Capture/Display mode).
See Section 3.3.1.
„ Enc.+ Dec. Loopback (also called Encode / Decode mode).
See Section 3.3.2.
„ Decode from File. See Step 9 and Section 3.3.3.
„ Encode to File. See Step 10 and Section 3.3.4.