Texas Instruments TMS320DM6437, Getting Started Manual, Page: 18 / 64

Installing the Software
2-6
2.2 Installing the Software
To install the software needed to use the DVDP, follow these steps:
1) Use the Spectrum Digital CDs to install Code Composer Studio 3.3.
2) Also use the same Spectrum Digital CDs to install the DM6437 EVM
Drivers and Target Content.
3) Optionally use the SoC Analyzer CD to install the SoC Analyzer
software. See the SoC Analyzer documentation for details.
4) Install the DVSDK software for your board by following these steps:
a) Insert the Digital Video Software Development Kit (DVSDK) CD
#1 of 2 and allow the installer to autostart or alternatively run the
DM6437_DVSDK_setupwin32_1_xx_xx_xx.exe file, where "xx"
indicates the version and build numbers.
b) When you are prompted for an installation directory, we strongly
recommend that you use the default location. If the DVSDK is
installed in a nonstandard location, you will need to edit the
xdcpaths_evmDM6437.dat file located in the top-level directory
to modify the path set for dvsdkInstallDir so that it points to the
actual installation location.
c) The DVSDK installer automatically launches the DSP/BIOS
installer, dsp_bios_setupwin32_5_xx_xx_xx.exe, to update your
Code Composer Studio directory with a newer release of
DSP/BIOS (where "xx" indicates the version and build numbers).
You will also need to:
™ Make sure the BIOS_INSTALL_DIR environment variable is
changed to point to this new version of DSP/BIOS:
BIOS_INSTALL_DIR = C:/CCStudio_v3.3/bios_5_xx_xx
™ Launch the CCStudio Component Manager and modify the
Target Content (DSP/BIOS)->TMS32067xx setting to use
the updated version of DSP/BIOS.
d) A minimal set of A/V clips is installed automatically from CD #1.
If you want to install the full complement of A/V clips, insert
DVSDK CD #2 of 2 and run the dvsdk-avinstaller.exe installer.
5) See the release_notes_biosdvsdk_1_xx.html file installed with the
DVSDK for the latest information about the software in the DVSDK
and the index_manuals.html file for links to other documents in the
DVSDK.