Texas Instruments TMS320DM6437, Getting Started Manual, Page: 24 / 64

Running the Demos with the PC Host Application
3-4
3.3 Running the Demos with the PC Host Application
The target-side demo application is stored in Flash memory and runs
automatically when you power up the board.
Alternately, you can run the target-side demo application manually by
following these steps:
1) If you have not already done so, use CCStudio Setup to select the
DM643x platform.
2) Connect to the DM6437 by choosing Debug->Connect (Alt+C).
3) Reset the CPU by choosing Debug->Reset CPU (Ctrl+R).
4) Within CCStudio, choose File->Load Program and select the
dm643x_demo.out file in the Debug subdirectory. This loads the
target program onto the DM6437 EVM.
5) Use CCStudio to run the program on the target. If you like, you can
run the target program on more than one DM6437 EVM if they are
connected to your network.
The PC host-side application lets you control the target-side demo
application. The host-side and target-side applications exchange data
only through the IP network (not through JTAG).