manualshive.com logo in svg

Texas Instruments TMS320DM6437, Getting Started Manual, Page: 36 / 64

Share
Download
Texas Instruments TMS320DM6437 Getting Started Manual Download Page 36

Software Overview

4-2

4.1

Software Overview

The DaVinci software approach provides interoperable, optimized,
production-ready video and audio codecs that leverage DSP and
integrated accelerators. These codecs are built into configurable
frameworks, and are presented via published APIs within popular
operating systems (such as Linux) for rapid software implementation.

4.1.1

Software Components

The software included with the TMS320DM6437 DVDP is the Digital
Video Software Development Kit (DVSDK). 

The heart of this software is the Codec Engine programming model.
Related components include the DSP/BIOS target operating system,
drivers, a networking stack (evaluation version). Customers can use the
provided Codec Engine or choose individual components for their own
video application development.

For the TMS320DM6437 DVDP, which is a DSP-only kit, the DVSDK
includes Microsoft Windows host software.

For more information about the software components used in these
applications see www.ti.com and the PDF files included with the
installation.

Summary of Contents for TMS320DM6437

































































Reviews:

No comments