manualshive.com logo in svg

Texas Instruments TMS320C67X+ DSP, Reference Manual

The Texas Instruments TMS320C67X+ DSP boasts powerful capabilities in signal processing. Unlock its full potential with the comprehensive Reference Manual, available for free download from our website. Gain in-depth insights and learn how to maximize the capabilities of this exceptional product.

Share
Download
background image

Contents

vii

Contents

SPRU733

CLR (Clear a Bit Field)

3-77

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

CMPEQ (Compare for Equality, Signed Integers)

3-80

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

CMPEQDP (Compare for Equality, Double-Precision Floating-Point Values)

3-82

. . . . . . . 

CMPEQSP (Compare for Equality, Single-Precision Floating-Point Values)

3-84

. . . . . . . . 

CMPGT (Compare for Greater Than, Signed Integers)

3-86

. . . . . . . . . . . . . . . . . . . . . . . . . . 

CMPGTDP (Compare for Greater Than, Double-Precision Floating-Point Values)

3-89

. . 

CMPGTSP (Compare for Greater Than, Single-Precision Floating-Point Values)

3-91

. . . 

CMPGTU (Compare for Greater Than, Unsigned Integers)

3-93

. . . . . . . . . . . . . . . . . . . . . . 

CMPLT (Compare for Less Than, Signed Integers)

3-95

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

CMPLTDP (Compare for Less Than, Double-Precision Floating-Point Values)

3-98

. . . . . 

CMPLTSP (Compare for Less Than, Single-Precision Floating-Point Values)

3-100

. . . . . 

CMPLTU (Compare for Less Than, Unsigned Integers)

3-102

. . . . . . . . . . . . . . . . . . . . . . . . 

DPINT (Convert Double-Precision Floating-Point Value to Integer)

3-104

. . . . . . . . . . . . . . 

DPSP (Convert Double-Precision Floating-Point Value to

Single-Precision Floating-Point Value)

3-106

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

DPTRUNC (Convert Double-Precision Floating-Point Value to

Integer With Truncation)

3-108

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

EXT (Extract and Sign-Extend a Bit Field)

3-110

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

EXTU (Extract and Zero-Extend a Bit Field)

3-113

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

IDLE (Multicycle NOP With No Termination Until Interrupt)

3-116

. . . . . . . . . . . . . . . . . . . . . 

INTDP (Convert Signed Integer to Double-Precision Floating-Point Value)

3-117

. . . . . . . 

INTDPU (Convert Unsigned Integer to Double-Precision Floating-Point Value)

3-119

. . . . 

INTSP (Convert Signed Integer to Single-Precision Floating-Point Value)

3-121

. . . . . . . . 

INTSPU (Convert Unsigned Integer to Single-Precision Floating-Point Value)

3-122

. . . . . 

LDB(U) (Load Byte From Memory With a 5-Bit Unsigned Constant Offset or

Register Offset)

3-123

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

LDB(U) (Load Byte From Memory With a 15-Bit Unsigned Constant Offset)

3-126

. . . . . . 

LDDW (Load Doubleword From Memory With an Unsigned Constant Offset or

Register Offset)

3-128

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

LDH(U) (Load Halfword From Memory With a 5-Bit Unsigned Constant Offset or

Register Offset)

3-131

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

LDH(U) (Load Halfword From Memory With a 15-Bit Unsigned Constant Offset)

3-134

. . 

LDW (Load Word From Memory With a 5-Bit Unsigned Constant Offset or

Register Offset)

3-136

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

LDW (Load Word From Memory With a 15-Bit Unsigned Constant Offset)

3-139

. . . . . . . . 

LMBD (Leftmost Bit Detection)

3-141

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

MPY (Multiply Signed 16 LSB by Signed 16 LSB)

3-143

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

MPYDP (Multiply Two Double-Precision Floating-Point Values)

3-145

. . . . . . . . . . . . . . . . . 

MPYH (Multiply Signed 16 MSB by Signed 16 MSB)

3-147

. . . . . . . . . . . . . . . . . . . . . . . . . . 

MPYHL (Multiply Signed 16 MSB by Signed 16 LSB)

3-149

. . . . . . . . . . . . . . . . . . . . . . . . . . 

MPYHLU (Multiply Unsigned 16 MSB by Unsigned 16 LSB)

3-151

. . . . . . . . . . . . . . . . . . . . 

MPYHSLU (Multiply Signed 16 MSB by Unsigned 16 LSB)

3-152

. . . . . . . . . . . . . . . . . . . . . 

MPYHSU (Multiply Signed 16 MSB by Unsigned 16 MSB)

3-153

. . . . . . . . . . . . . . . . . . . . . 

MPYHU (Multiply Unsigned 16 MSB by Unsigned 16 MSB)

3-154

. . . . . . . . . . . . . . . . . . . . 

MPYHULS (Multiply Unsigned 16 MSB by Signed 16 LSB)

3-155

. . . . . . . . . . . . . . . . . . . . . 

MPYHUS (Multiply Unsigned 16 MSB by Signed 16 MSB)

3-156

. . . . . . . . . . . . . . . . . . . . . 

Summary of Contents for TMS320C67X+ DSP


















































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for TMS320C67X+ DSP

FOR-A USF-105AS Operation Manual preview
USF-105AS
Brand: FOR-A Pages: 39
axing EOC 1-31 Operation Instructions Manual preview
EOC 1-31
Brand: axing Pages: 52
VideoWave Adam Device User Manual preview
Adam Device
Brand: VideoWave Pages: 12
Navitar 1-62643 Dimensional Drawing preview
1-62643
Brand: Navitar Pages: 1
AES BeBoPr++ User Manual preview
BeBoPr++
Brand: AES Pages: 44
Corsair ELITE LCD UPGRADE KIT Manual preview
ELITE LCD UPGRADE KIT
Brand: Corsair Pages: 11
ADTRAN 1200127L1 User Manual preview
1200127L1
Brand: ADTRAN Pages: 20
Vantec Aeroflow FX 120 VAF-1225 User Manual preview
Aeroflow FX 120 VAF-1225
Brand: Vantec Pages: 2
Digi NS7520B Series Hardware Reference Manual preview
NS7520B Series
Brand: Digi Pages: 339
IEI Technology PCIE-Q470 User Manual preview
PCIE-Q470
Brand: IEI Technology Pages: 90
Cambium Networks PTP 820C User Manual preview
PTP 820C
Brand: Cambium Networks Pages: 672
Aethra AF3400 Technical Specifications preview
AF3400
Brand: Aethra Pages: 2
Teltone ILS-B User Manual preview
ILS-B
Brand: Teltone Pages: 50
Ecolab 2.237.82 Operating Instruction preview
2.237.82
Brand: Ecolab Pages: 37
Arbor Technology EmQ-i2506 Quick Installation Manual preview
EmQ-i2506
Brand: Arbor Technology Pages: 8
Arbor Technology EmCORE-i2305 User Manual preview
EmCORE-i2305
Brand: Arbor Technology Pages: 70
F5 8900 Platform Manual preview
8900
Brand: F5 Pages: 64
HDA 22U016 Instruction Manual preview
22U016
Brand: HDA Pages: 6

Brands by name

Popular brands

Load more brands