GUI Introduction
3
GUI Introduction
shows the Setup tab.
Figure 6. PC Application
Table 1. GUI Tabs
Name
Contents and Functions
Setup
This tab explains how to configure the system.
Using an RF430FRL152HEVM, this tab allows automatic setup, measurement, and display of
Demo Mode
the thermistor and light sensor's measurements with one click of a button.
This tab contains controls that allow starting the sampling process, choosing the sensors to be
General Device Configuration
used, and selecting the sampling frequency, among other options.
Sensor Configuration
This tab contains settings for the ADC for each analog sensor and also advanced settings.
Alarm Control
This tab contains settings for enabling and disabling the alarm settings.
Sensor Threshold Configuration
This tab contains settings for alarm thresholds for each sensor.
View Sensor Data
After a sampling process has completed, this tab allows the user to view the logged data.
8
RF430FRL152HEVM User's Guide
SLAU607 – December 2014
Copyright © 2014, Texas Instruments Incorporated
