Input
Output
Input for
Channel B
Output for
Channel B
www.ti.com
Connections
21
SBOU193 – July 2017
Submit Documentation Feedback
Copyright © 2017, Texas Instruments Incorporated
DUAL-DIYAMP-EVM
The input and output connections can also be accessed from the header strip. The input connections for
channel A and channel B are labeled INA and INB, respectively. The output connections for channel A
and channel B are labeled OUTA and OUTB, respectively. An example highlighting the input and output is
shown in
Figure 33
.
Figure 33. Input and Output Labeled as INA, INB and OUTA and OUTB
Depending on the circuit, only one input and output may be available. In that case the input and output is
labeled Vin and Vout, respectively.
Figure 34. Input and Output Labeled as Vin and Vout
