Texas Instruments DRA76xP-ACD, User Manual, Page: 5 / 38

www.ti.com
Overview
5 SPRUII5A – December 2017 – Revised November 2018
Submit Documentation Feedback
Copyright © 2017–2018, Texas Instruments Incorporated
DRA77xP/DRA76xP-ACD CPU EVM Board
Table 3. EVM Kit Truth Table (continued)
EVM/Kit Name CPU Bd RGB-to-HDMI 1080P Display
Fusion App
Bd
Camera Kit
for Fusion
JAMR3 App
Bd
Vision App
Bd
TDA2Px-ACD ES1.0
GP EVM Vision Kit
Rev A X X
TDA2Px-ACD ES1.0
GP EVM Fusion Kit
Rev A X X X
2.2 CPU Board Feature List
• Processor:
– DRA77xP/DRA76xP/TDA2Px (Superset SoC) (23 mm x 23 mm package, 0.8 mm pitch)
– Support for corresponding socket
• Power supply:
– 12 V DC input
– Optimized power management solution
– Compliant with SoC power sequencing requirements
– Integrated power measurement
• PCB:
– Dimension (W x D) 220mm x 170mm
– 100% PTH technology
• Memory:
– DRAM (DDR3L-1333): 4 Gbyte (2 GByte for each EMIF) (EMIF1 optionally supports ECC)
– Quad Serial Peripheral Interface (SPI) Flash: 256 M-bit
– eMMC Flash: 8G-bit (v4.51 compliant)
– NAND Flash: 4G-bit
– NOR Flash: 512 M-bit
– Serial EEPROM, 32K-bit
– MicroSD Card Cage
• Boot mode selection DIP switch
• Digital Temperature Sensor (TMP102)
• JTAG/Emulator:
– 60 pin MIPI Connector/Trace Connector
– Adapter for 20 pin-CTI adapter: 10 x 2, 1.27mm pitch
• Supported Interfaces and Peripherals:
– CAN Interface, two 2-wire PHY (either can also support CAN-FD)
– 2x USB Host receptacles (1x USB3.0 (micro-USB), 1x USB2.0 (Type-A))
– Audio Codec (AIC3106) with Headphone OUT, Line OUT, Line IN, Microphone IN
– 3x Video outputs (HDMI, RGB/LCD, FPD-Link III)
– Camera Sensor(s) supported via Leopard Imaging Module Interfaces (Parallel and MIPI)
– PCI Express (PCIe), 2x Channel
– SATA
– MLB and MLBP on Mictor connector
– Universal Asynchronous Receiver/Transmitter (UART) terminal via USB FTDI converter (mini-A/B
USB)
– COM8Q module interface for Bluetooth and WLAN support