TEXA Konfort 700R Series, Technical Manual

Page: 65 / 86

KONFORT 710R / 710L / 712R / 720R / 760R / 760R BUS / 780R BI-GAS
a) Screw nuts for the filter
b) Blocking clip
c) Filter
d) Arrow indicating the direction
of the flow
KONFORT 707R / 705R / 705 OFF ROAD
a)
Screw nuts for the filter
b)
Blocking clip
c)
Filter
d)
Arrow indicating the direction
of the flow
Proceed as follows:
1. Access the components inside the recharging station:
•
720R / 760R / 760R BUS / 780R BI-GAS: open the service lid.
•
710R / 710L / 712R: remove the service cover.
•
707R / 705R / 705 OFF ROAD: remove the front shield.
2. Open the filter's blocking clip.
3. Unscrew the fixing nuts of the dryer filter using appropriate hexagonal
wrenches n° 16 and n° 19.
4. Remove the filter by slipping it from the right side.
5. Check that the sealing O-rings are in good condition and replace them if
necessary.
6. Install the new filter screwing the fixing nuts with a tightening torque of
approximately 17 N m.
65
en